For Vertical Machining Center
DKSS ｜SERVO SYSTEM DRUM TYPE TOOL MAGAZINE
Description：
◆ Unique acceleration and deceleration of the S-curve control, the arm is rotated to the buckle tool, the spindle impact to a minimum, effectively protect the spindle and prolong life.
◆ When using a tool with more than 4KG, follow the heavy tool mode instructions to ensure tool change stability.
◆ Global Initiative Hand Crank Reducer. Exclusive use of the Sanjet's manual rotating crank for the adjustment of operation mechanism.
DKSS ：
◆ Double Servo: Magazine with servo motors can effectively avoid the inertia force caused by the rotation of the tool disk when machining. It affects the machining accuracy of the column vibration.
◆ The integration of two single drive servo motor, using I/O communication, can be any brand of controller and system.
Place of Origin：Taiwan
Description
Please swipe the page ← → to see content 。
| Magazine Specification | 30# | 40# |
|---|---|---|
| Tool Specification | BT/CAT/DIN/ISO/HSK | |
| Tool loading capacity | 16/20/24/30/32/36 | 16/20/24/30/32 |
| Max. tool length | 250mm | 350mm |
| Max. tool diameter full tool | Ø70mm(16T) / Ø55mm(20T) / Ø60mm(24T) / Ø60mm(30T) / Ø55mm(32T)/ Ø60mm(36T) | Ø85mm(16T) / Ø95mm(20T) / Ø80mm(24T) / Ø60mm(28T)/Ø75mm(30T) /Ø75mm(32T)/Ø75mm(40T) |
| Max. tool weight | 3kg | 8kg |
| Tool change time (Tool clamp or unclamp time is 0.6 sec) |
1.2sec | 1.3sec |
| Tool selection | Shortest route tool selection | |
| Magazine motor | Single servo | |
| Tool change time | 1.2sec | 1.3sec |
| Drive | AC 3φ 220V | |
| Air source pressure | 3.5-6kg/cm² | |
.
